Kit - Universal Wall & Ceiling Mount Bracket with Matching Screws "Made in Germany"
Universal Wall & Ceiling Mount Bracket, 100 % Made in Germany for Suspension Straps, Aerial Hoops, Aerial Silks, Yoga Swings & Hammock, Strength Training Systems & Boxing Equipment.
The universal ceiling mount is the connecting means between the ceiling and the artist's device.
Through the four large 17mm sized holes, the suspension can be fixed with rawl plugs in the ceiling. You can hook shackles/carabiners to the 3 holes below.
Here you can hang, for example, trapeze, aerial rings, yoga or aerial fabrics. It is perfect for yoga hammock trapeze, aerial hoops, training straps, yoga swing, boxing punching bag, battle rope.
Through our Safety First test piece, it is easy to check the carrying capacity of the construction at any time. Depending on the safety factor with which the plate is to be operated, it has a payload of 500 kg with an SF of 20 and a payload of 1000 kg with an SF of 10. The breaking load is 10,000 kg.
In order to actually get such a bearing capacity, the rawl plugs, screws and the wall/ceiling must have a corresponding load capacity.
So you should keep at least a 7-fold safety factor, with a payload of e.g. 200 KG. In this case, the ceiling and the rawl plugs should have a load capacity of 1400 kg. If the plate is used with dynamic loads, we recommend a 10 times safety factor.
If necessary, the plate can also be fixed to the floor or to the wall. But it is important to ensure that the suspension is always loaded in the pulling direction. Mounting hardware (bolts, screws, rawl plugs) not included, due to various mounting surfaces. You can however purchase them separately from our shop.
The construction is completely made in Germany and welded according to DIN EN 1090-2 EXC3. The sheets used are soundproofed against defects.
- Color: black or white
- Diameter: 25 cm
- Height: 5,5 cm
- Breaking load: 10000 KG
- Weight: 4,38 KG
- DIN EN 1090-2 EXC3
- Made in Germany